|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electronic Conversion for 8 Cylinder Chevy Distributors |
| After working on and teaching ignition systems for 30 plus years we have found the Chrysler electronic distributor and the GM HEI control module to be the best ever, system for system!. |
The following pictorial illustrates what our typical conversion consists of. |
| We start with your good useable Chevy 8 cylinder distributor unit. |
|
|
| Disassemble and clean the assembly. |
|
|
|
Prep the breaker plate for installation of the electronic pick-up coil. |
 |
|
Chrysler pick-up coil is used in our conversion. Readily available at any local auto parts store. |
 |
|
A machined Chrysler reluctor is pressed onto the points cam. |
 |
|
Pick-up coil is mounted on the modified plate and air gap is set to .008". |
 |
| The assembly is run in distributor machine to test pickup coil output and timing advance. |
 |
| Next is the control module. We mount the GM control module to the underside of the distributor. |
|
|
|
Complete unit ready to ship. |
 |
Call or E-mail us for Pricing! |
If it makes spark, we do it !!! |
| Bubba's Hot Rod Shop 1330 Main Street Speedway, Indiana 46224 1-888-809-3835 |
